Select your product type to start searching by model
Product filterBuffer tank for Heatpump system 60L Duplex Steel 2205
Item No.
PWT-60L
Buffer tank for Heatpump system 60L Duplex Steel 2205 This is an electric water tank used to obtain and store hot water, and can also be used for solar energy, heat pumps, boilers, etc. The buffer water tank is an insulated pressure tank with a pressure of 0.76MPa. Make sure there is plenty of hot
Description
Buffer tank for Heatpump system 60L Duplex Steel 2205
This is an electric water tank used to obtain and store hot water, and can also be used for solar energy, heat pumps, boilers, etc.
The buffer water tank is an insulated pressure tank with a pressure of 0.76MPa.
Make sure there is plenty of hot water available.
The product is suitable for indoor and outdoor installation, and can be placed in an appropriate position according to the size of the space position.
Product performance:
* High efficiency -- the use of EU standard polyurethane foam, uniform foaming without bubbles, 24 hours only drop 6 degrees Celsius.
* Environmental protection -- the water tank absorbs heat through the coil to heat the hot water in the water tank, in line with environmental standards.
* Durability -- beautiful appearance, long service life (10 years), suitable for a wide range of areas.
This is an electric water tank used to obtain and store hot water, and can also be used for solar energy, heat pumps, boilers, etc.
The buffer water tank is an insulated pressure tank with a pressure of 0.76MPa.
Make sure there is plenty of hot water available.
The product is suitable for indoor and outdoor installation, and can be placed in an appropriate position according to the size of the space position.
Product performance:
* High efficiency -- the use of EU standard polyurethane foam, uniform foaming without bubbles, 24 hours only drop 6 degrees Celsius.
* Environmental protection -- the water tank absorbs heat through the coil to heat the hot water in the water tank, in line with environmental standards.
* Durability -- beautiful appearance, long service life (10 years), suitable for a wide range of areas.
SST MODEL | PWT-60L(buffer tank) | PWT-100L(buffer tank) | PWT-150L(buffer tank) | PWT-200L(buffer tank) | |
NOMINAL CAPACITY | L | 60 | 100 | 150 | 200 |
OUTER TANK DIAMETER | mm | Φ470 | Φ470 | Φ470 | Φ560 |
INNER TANK DIAMETER | mm | Φ370 | Φ370 | Φ370 | Φ470 |
HEIGHT | mm | 672 | 1035 | 1415 | 1325 |
INNER TANK MATERIAL | Duplex Steel 2205 | ||||
INNER TANK THICKNESS | mm | 1 | 1 | 1 | 1 |
OUTER CASE MATERIAL | Galvanized Sheet with Painting | ||||
ELECTRICAL HEATER TYPE | No | ||||
CONNECTIONS | Temp.sensor hole | G1/2" | G1/2" | G1/2" | G1/2" |
Hotwater outlet | G3/4'' | G3/4'' | G3/4'' | G3/4'' | |
Heat Exchanger coil | / | / | / | / | |
inlet/outlet | |||||
Cold water inlet | G3/4'' | G3/4'' | G3/4'' | G3/4'' | |
Circulation | G3/4'' | G3/4'' | G3/4'' | G3/4'' | |
T/P connection | G1/2" | G1/2" | G1/2" | G1/2" | |
Mg.anode | No | ||||
WORKING PRESSURE | Bar | 6 | 6 | 6 | 6 |
MAX.TESTING PRESSURE | Bar | 10 | 10 | 10 | 10 |
INSULATION | Polyurethane Foaming | ||||
INSULATION THICKNESS | mm | 50 | 50 | 50 | 45 |
PACKING SIZE | mm | 540*540*790 | 540*540*1170 | 540*540*1560 | 630*630*1400 |
Specifications
Condition | New product |
Garantietermijn | 1 Year Carry-In |